Question G3F/G3M: Must we beg?

  • goalposthead
  • goalposthead's Avatar Topic Author
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 12
  • Thank you received: 2

goalposthead created the topic: G3F/G3M: Must we beg?

You guys do an amazing work at creating lookalikes. You basically are the BEST when it comes to this. Still, the market evolves
and you really should consider getting out of your comfort zone a bit and go for the G3 figures as a base. Nowadays, it's a minimum.
I would give you my money without a thought should you make a new "Speed Girl" meant for G3F. Some excellent gear already exists
that can go on a Diana Prince warrior princess, all we need is a FACE. Also, this is but one example. You could sell us characters, outfits...
and we would definitely buy. Leave your couch, guys, get to it. We would love you very much.
#1673
The following user(s) said Thank You: wartech
  • wartech
  • wartech's Avatar
  • Away
  • Administrator
  • Administrator
  • Posts: 941
  • Thank you received: 184

wartech replied the topic: G3F/G3M: Must we beg?

Hi! from this year we start producing character in 2 formats for V4 and G3 ..

Latest KOKO will be released this week in G3 format))
#1674
The following user(s) said Thank You: joeblow
  • Posts: 4
  • Thank you received: 0

ironsite replied the topic: G3F/G3M: Must we beg?

Hi,

Just wanted to confirm there will be a G3F version of the new MarryRose? :)
#1736
  • wartech
  • wartech's Avatar
  • Away
  • Administrator
  • Administrator
  • Posts: 941
  • Thank you received: 184

wartech replied the topic: G3F/G3M: Must we beg?

Yes i think yes))) But have to understand how to make morphs for G3)))
#1737
  • Posts: 4
  • Thank you received: 0

ironsite replied the topic: G3F/G3M: Must we beg?

Thanks for the reply.

I'll look forward to it. :)
#1738
  • Posts: 10
  • Thank you received: 4

BlueCult replied the topic: G3F/G3M: Must we beg?

There are multiple ways to convert morphs and skin textures from one generation to the next. GenX works pretty well for morphs with the right expansions. There's also a user on Deviant Art selling a small app that will convert V4 and G2F to G3F (and only female, males are not covered.) And Renderosity sells a texture converter that can convert textures from V4/G2F to G3F, or any number of models with the right add-ons.
So converting models from V4 to current G3F is pretty painless in general with these tools. There are more manual methods in tutorials on Daz's forums.

Converting clothing to G3 is a bit more involved. Sometimes the autofit and transfer utility works great, and sometimes it works poorly. There are ways to convert clothes, with tutorials on Daz3d's forums and Deviant Art among other places. Most clothes are not too bad, until you get to shoes. I hate trying to convert high heel shoes! It can be done, but it is painful.

At any rate, this is what I would do: I would use GenX to transfer the V4 morph to G3F. Do the head and body shapes separately. Then I'd use whatever 3d program you use to fine tune that shape as it may not be 100% accurate but it should be real close. Once done and you have your finished morph, go into the joint editor in Daz and pick the option to "adjust figure to shape." This will make the bones fit the shape better in case the transfer caused them to move around. It takes just a few minutes to do all of this and you will have a perfect clone of your original shape without needing to do a ton of work.

Blacksmith3D has a texture transfer tool, plus that same tool can also be purchased by itself much cheaper. It works pretty well and can create near perfect G3F versions of your textures, and do so pretty quickly. It also can work backwards, so you can transfer G3 characters to V4!

With these tools, you never have to worry about "This character isn't the generation of figure I use!" ever again.
#1739
The following user(s) said Thank You: wartech
  • wartech
  • wartech's Avatar
  • Away
  • Administrator
  • Administrator
  • Posts: 941
  • Thank you received: 184

wartech replied the topic: G3F/G3M: Must we beg?

Hi!

For cloth is no problem cause we from some time ago start adding to all of them G2 as morph and now is G3))
So even powerArmor for V4 exists in version for G2... Marie Rose clothes have G3F morphs...


As about v4... really appreaciated if you sent me a link to DeviantArt tool for V4 to G3F

Blacksmith3D we have... but not happy too much))

Main problem that Daz Skinning is really bad... i do not understand why they did it like in Max for example... 3d MAx... it have poser Metrices with 2 spheres and weight skinning... and they live fine together... you can easilier transnfer skin between characters.... yes you loose weight skin but Metrices will be ... but they create just other side ... just weight skinning(yes they have Metrices, but they does not work together)... .. show how they hate poser... and that is really really stupid... As result skining from enjoyble staff becomes NOT fun at all... mainly cause you can easiler do something that can not be reverted... and you have to start up from last save....
#1740
  • Posts: 10
  • Thank you received: 4

BlueCult replied the topic: G3F/G3M: Must we beg?

Well, the Deviantart tool is about $25, here it is.
darkhound1.deviantart.com/art/Legacy-to-...uy-it-here-589021408

Follow the steps as outlined and it should work. And again, it only works for females, and only from older to newer generations. You can convert V4 or G2F to G3F, and that is all. But it is pretty fast and the instructions are easy to follow.
GenX at Daz3d has more flexibility, but the DA version does not depend on file locations like GenX does. With GenX, I have had various errors and things because apparently I have some duplicate files or something. I don't know, it just doesn't work right for me half the time.
The DA tool doesn't care about where your files are, it takes the shape you have dialed in and exports it as an obj file to its app, and then the app does its little magic before importing a new G3F back into Daz. That's basically how it works. The resulting shape morphs might need some tweaks depending on how extreme the original was, but they should be very close. You can see examples on DA.

Blacksmith3D is very awkward to use, and it is annoying, but it really works. I've converted textures from different generations and they work flawlessly. I did them in 3 steps. I converted the base colors first, then I place my bump maps on the color map spots and converted those, and finally the SSS maps in the color map spots and converted those. That's because BS3D only converts the maps in the diffuse color spots. So those have to be swapped out and the conversion ran a few times to convert them all. Its still much faster than doing this manually, and its the only automated method I am aware of for converting Daz textures. Once you do it a few times, you get used to it and the process gets easier.
Then you can apply some Iray shader presets to the new G3F and see the magic.

I already converted the Marry V4 character's morphs I bought from you to G2F and G3F using GenX. Since it worked, I didn't try using the DA tool. I haven't done the textures yet.
#1741
The following user(s) said Thank You: wartech
  • Posts: 4
  • Thank you received: 0

ironsite replied the topic: G3F/G3M: Must we beg?

I know that when I converted SpeedGirl for V4 to G3F, using GenX, it ended up with her teeth sticking out of her face.

I also had issues when I tried to convert the Stormtrooper armour to G3M using the Daz built in clothing converter.

After that, I decided I'd wait for FoRender to make G3 products.
#1742
  • wartech
  • wartech's Avatar
  • Away
  • Administrator
  • Administrator
  • Posts: 941
  • Thank you received: 184

wartech replied the topic: G3F/G3M: Must we beg?

Yes ExtraClones also have some problem with KOKO for G3 when try converter... charater head was not converted good...
#1743
  • Posts: 4
  • Thank you received: 0

ironsite replied the topic: G3F/G3M: Must we beg?

On the subject of the Blacksmith3D texture transformer.

- Texture Transformer Version 2.0 -

Texture Transformer (TTv2) has received a major upgrade. Skin textures can now be converted using cr2, duf, pz2 or mc6 files AND without having to first save the texture(s) to the original/source figure (you must still own the original/source figure for TTv2 to be able to find it in your 'runtime' path). Also, we have added batch input/source files to batch output/destination files to sub-folder paths that you specific, which is perfect for vendors updating their character packs. Finally, the TTv2 packs are now distributed as files, instead of a folder containing multiple files. This makes managing your collection much easier, and hopefully will reduce confusion when updating your software. Please remember that TTv2 is only available in the stand alone version or in Blacksmith3D PRO-7, and not available in the Standard versions.

#1744
  • Posts: 10
  • Thank you received: 4

BlueCult replied the topic: G3F/G3M: Must we beg?

ironsite wrote: I know that when I converted SpeedGirl for V4 to G3F, using GenX, it ended up with her teeth sticking out of her face.

I also had issues when I tried to convert the Stormtrooper armour to G3M using the Daz built in clothing converter.

After that, I decided I'd wait for FoRender to make G3 products.


There are ways to fix the teeth if that happens. There are shape morphs to move teeth up, down, in and out.
Also, this:
www.digi-dotz.com/index.php/free-poses/t...-morph-in-daz-studio
Step #8 is what I am talking about. I am not sure if you need to move the teeth first or not, I haven'y tried it on teeth. But this step will adjust the bones to the morph shape and prevent a number of problems that having an ill fitted skeleton will. GenX can cause the rigging to be a bit off, and this fixes that. The DeviantArt tool can do that, too.

Autofitting armors is tough because of how autofit works. It "breaks" the rigging of the item. And then it tries to fit the shape to the new figure, and that means it will bend in places you may not want it to.
I don't have this stormtrooper armor, but I have a free one from CG or something, also for M4. You have a few options.
When it comes to armor, it may be better to bring the armor into the scene without autofitting it to any model. Just open it by itself. Then open your G3. Move the armor in place on the G3 and parent it to that body part, do not autofit. Maybe autofit will work on some parts that are flexible, like arms, but do not fit the body, parent it instead. The free armor I have has the armor plates separate from the black flexible mesh they wear. So one option is to autofit the mesh, and parent the armor pieces. You may need to make some parts of the G3 invisible to prevent poke through.

Another option is to just use the armor on its intended M4 figure. Maybe you'd rather not because you don't have any M4 poses. But that's not a problem. I have found that many Genesis 1 and Genesis 2 poses will work on V4 and M4 models. Genesis 3 doesn't because Daz had to be stupid and reinvent something that didn't need reinventing. Anyway, if you have any pose presets for G1 or G2, then you have a collection for you M4 to use. Unless you really need a G3 for a face, but I'm assuming you don't need to unmask your troopers.

If you do not have many G2 poses, I got you covered there, too. There is a free script that will generate your entire G3 pose collection to G2. Now the hands and feet might be a bit off and need adjustment, but the poses are very accurate. Getting that much of the pose done is 90% of the battle! You need to have Python installed for it to work, but this script takes like a few seconds to make a G2 copy of your G3 poses.
I found it on Daz here:
www.daz3d.com/forums/discussion/137491/c...es-to-g2-it-works/p1
There's another freebie script that will convert all sorts of poses of different generations, it even works on animations:
www.daz3d.com/forums/discussion/109961/p...tions-of-daz-figures

With these tools you do not have to fight with attempting to fit the armor to G3 at all.
#1745
  • Posts: 139
  • Thank you received: 20

MKDAWUSS replied the topic: G3F/G3M: Must we beg?

G3 now got replaced by G8
#1764
  • wartech
  • wartech's Avatar
  • Away
  • Administrator
  • Administrator
  • Posts: 941
  • Thank you received: 184

wartech replied the topic: G3F/G3M: Must we beg?

The worst staff... that Daz change T-Pose on G8 ...
#1765
  • goalposthead
  • goalposthead's Avatar Topic Author
  • Offline
  • Fresh Boarder
  • Fresh Boarder
  • Posts: 12
  • Thank you received: 2

goalposthead replied the topic: G3F/G3M: Must we beg?

I wouldn't worry too much with G8 yet, you guys can do a *lot* of things on G3. Also, G8 remains retrocompatible with non-boned G3 clothes.
#1766